UL listed CGR 8002 with Acrylic adhesive
|
This is CGR’s highest performing UL listed combination, combining pure EPDM sponge with an aggressive acrylic PSA system  |
 |
Common usages for CGR 8002 with Avery 702P adhesive include higher temperature needs for enclosures, lighting, power equipment, or HVAC
CGR 8002 with AVERY 702P
ASTM D 1056 2A2
SAE J 18 APR2002 2A2
ASTM D 6576 IIB/C Soft/Medium
Polymer EPDM
Density 9.0 +/-2 lb/ft3
Hardness 53 +/- 5 Shore 00
Compression Deflection (25%) 7 .0 +/-2 psi
Compression Set <=25%
Tensile Strength 75 psi
Tear Strength 12 lb/inch
Elongation 150%
Service Temp
-70 Fahrenheit
+220 Fahrenheit Continuous
+250 Fahrenheit intermittent
Water Absorption <10 Max % weight change
Combustion Characteristics FMVSS-302 Pass
Manufacturer Specification Sheet
Adhesive
Double Coated Clear Polyester Tape
Designed for bonding to a wide variety of plastic, metal and foam substrates where resistance to plasticizers and high temperature is required.
-Polyester Carrier
-Specially formulated acrylic adhesive
-Moisture-stable release liner
-Heavy mass of adhesive on liner side
Thickness: 9.6 mils Total Construction (5 mils without liner)
2 mil PET 180 deg Peel Adhesion 12” min
Test Methods: PSTC-3, ASTM D3330, STD-10
Stainless Steel: 74 oz/in liner side
61 oz/in unwind side
Static Shear 2 mil PET @ 72 deg F/22 deg C 1 sq inch 5.5 lbs
Stainless Steel: Liner Side > 3,000
Unwind Side > 3,000
Manufacturer Specification Sheet
  | 
