UL Approved DK1111LD with Rubber Adhesive
|
Our UL approved DK1111LD sponge material with rubber adhesive supports UL properties and will do the same for your application. Avaliable in sheets, rolls and custom shapes and sizes for your convenience
 |
 |
|
This UL listed combination utilizes a Neoprene/EPDM blended sponge with a
high tack rubber adhesive. Common applications include enclosures,
control panels, and electrical components and the appliance market.
The rubber adhesive provides an excellent “quick stick” to most substrates. |
DK1111 with 3M 9816 Adhesive
Sponge
ASTM D 1056–91&00 2C1
ASTM D 1056-67 & 68 SCE 41
SAE J 18 R7/92 2C1
Listed to: UL 157, UL 50, UL 508
Polymer Neoprene / EPDM Blend
Service Temp
-40 Fahrenheit
+200 Farenheit
+250 Fahrenheit intermittent
Water Absorption <5 Max % weight change
|
Combustion Characteristics FMVSS-302 Pass
UL 94 HF1 Pass
|
Manfacturer Specification Sheet
Adhesive
General Purpose, high tack, rubber-based adhesive.Extremely high bond strength
to most surfaces. Excellent versatility for lamination to foam material. Excellent
dimensional stability with polyester carrier. Densified Kraft liner for rotary die cutting.
Adhesion
Dynamic Peel - 180 deg peel (ASTM-D3330 Modified) 72 hr Room Temperature Dwell
Stainless Steel 139 oz/in Polypropylene 130 oz/in Neoprene 48 oz/in 72Hr / 158 degrees F Sheer Adhesion (ASTM D3654, 1" x 1" overlap with 1 hour dwell Stainless Steel 1000 grams at room temperature Manufacturer Specification Sheet |
| 
