This is CGR’s highest performing UL listed combination, combining pure EPDM sponge with an aggressive acrylic PSA system. Recognized component

UL listed CGR 8002 with Acrylic adhesive
Access Our UL Certification Here

Common usages for CGR 8002 with Avery 702P adhesive include higher temperature needs for enclosures, lighting, power equipment, or HVAC

Max Service Temp

60 C / 140 F

Min Service Temp

10 C / 50 F

Tensile Strength (psi)

93

Elongation (%)

141

Max Compression Set (%)

16.5

End Use

Suitable for UL 50E continuous and periodic compression applications for enclosures Types 2, 3, 3X, 3RX, 3S, 3SX, 4, 4X, 5, 6, 6p, 12, 12K and 13 including oil immersion

Suitable with 702 Adhesive

Affixed to aluminum, galvanized steel, and powder-painted surfaces.

About the Material

CGR utilizes Armacell Monarch #8002, a closed-cell and medium density pure EPDM material. Monarch offers excellent resistance to UV, elevated temperatures and weathering. View the Armacell F-08002 Specification Sheet for additional information about the material’s density, tensile strength and more.

About the Adhesive

Our Double-Coated Clear Polyester Tape is designed for bonding to a wide variety of plastic, metal and foam substrates where resistance to plasticizers and high temperature is required.

  • Polyester Carrier
  • Specially formulated acrylic adhesive
  • Moisture-stable release liner
  • Heavy mass of adhesive on liner side

View the Avery DennisonTM FT 702P Specification Sheet to learn more about this adhesive.

Thickness

9.6 mils Total Construction (5 mils without liner)