Select By Industry

Rotary Kiss Cut Tape Tabs for the Medical Industry
Enlarge Image

3M 401+ Automotive Masking Tape with a Polyester Barrier
Enlarge Image

Slit Tapes used in the Medical Industry
Enlarge Image

Soft Silicone flange gaskets
Enlarge Image

Head gasket with fire ring used on single cylinder generator/welder
Enlarge Image

Multiple-sized beading on an interface gasketing material
Enlarge Image

Gasket redesign using beading to go from 12 bolts to 6 creating a cost savings
Enlarge Image

Laminated cork over steel for generator water pump jacket
Enlarge Image

Exhaust divider panel gasket for generators
Enlarge Image

Frenzelit exhaust flange gasket
Enlarge Image

Slit rolls of neoprene stripping with an applied adhesive.
Enlarge Image

Aluminized tape added to part of an insulation kit. The tape keeps the material intact once it is assembled in housing.
Enlarge Image

Metalized Kiss Cut Tape Tabs used in the Medical Industry
Enlarge Image

Large natural rubber molded boot, manufactured with 4.5 lbs. of rubber per shot.
Enlarge Image

Crushed foam gaskets nested for maximum material utilization.
Enlarge Image

Small engine metal clad gasket manufactured for high heat requirements.
Enlarge Image

Closed-cell sponge automotive lens gasket.
Enlarge Image

Red felt laminated with adhesive and kiss-cut to 12-pt liner.
Enlarge Image

Small engine carburetor gaskets cut from non-asbestos material.
Enlarge Image

Dovetail gasket to reduce excess center space
Enlarge Image

Multi-layer natural gas exhaust gasket. Designed with the goal of 40K-hour life expectancy
Enlarge Image

Textured rubber grip material with adhesive added die-cut into thumb pads
Enlarge Image

Multi-layer copper clad exhaust gasket used in a calibrated and certified fuel research engine
Enlarge Image

Interface material flange gasket
Enlarge Image

Die Cut & Kiss Cut Closed Cell Sponge
Enlarge Image

Copper foil tape die cut
Enlarge Image

Kiss-cut EVA cable wire pass gasket
Enlarge Image

3 Silicone sponge parts nested for maximum material savings
Enlarge Image

Sander backing pad
Enlarge Image

Intricate 3M VHB die cut
Enlarge Image

3M VHB kiss cut to a 12pt liner. then cut into a card
Enlarge Image

Textured EPDM automotive gasket
Enlarge Image

Cloth-inserted rubber diaphragm gasket
Enlarge Image

High-temperature graphite tang material used for small engine exhaust systems
Enlarge Image

Cork composite carburetor gaskets
Enlarge Image

High-temperature metal-clad carburetor gaskets
Enlarge Image

Interface material perforated for 2-in-1 gasket
Enlarge Image

Heavy gauge cloth-inserted belting material that is waterjet cut
Enlarge Image

Closed-cell foam with pressure-sensitive adhesives. Cut as a fold-out option to minimize waste.
Enlarge Image

Die-cut felt pads
Enlarge Image

Die-cut thin flange pads with centers left in for stability
Enlarge Image

Assembly of multi-layered foam, VHB and wire mesh. Acts as a gasket and protection of foreign objects into air intake
Enlarge Image

8# waterjet-cut EVA foam used for packaging delicate parts
Enlarge Image